Micropascal to Dyne Per Square Centimeter Converter - Pressure Converter
Use our Micropascal to Dyne Per Square Centimeter converter to convert Micropascal to Dyne Per Square Centimeter. Both Micropascal and Dyne Per Square Centimeter are units of Pressure. Convert quickly and easily between Micropascal and Dyne Per Square Centimeter using this conversion tool. You can also use our Pressure Converter to convert to various other units of Pressure.
Also learn How to Convert Micropascal and Dyne Per Square Centimeter using this Micropascal and Dyne Per Square Centimeter conversion tool to other Pressure units.
Select the current unit in the left column, the desired unit in the right column, and enter a value in the left column to generate the resulting conversion.
Micropascal Pressure Unit Conversion chart
Check out this Pressure Converter conversion table to find out what the conversion factors are between the various Pressure units:
Complete list of Pressure units for conversion, see how much 1 Micropascal is equivalent to in the below units.
1 Micropascal is equal to
Unit | Symbol | Value (1 Micropascal =) |
---|---|---|
Exapascal | EPa | 1e-24 |
Petapascal | PPa | 1e-21 |
Terapascal | TPa | 10e-19 |
Gigapascal | GPa | 10e-16 |
Megapascal | MPa | 1e-12 |
Kilopascal | kPa | 10e-10 |
hectopascal | hPa | 1e-8 |
Decapascal | daPa | 1e-7 |
Pascal | Pa | 0.000001 |
Decipascal | dPa | 0.00001 |
Centipascal | cPa | 0.0001 |
Millipascal | mPa | 0.001 |
Micropascal | μPa | 1 |
Nanopascal | nPa | 1000 |
Picopascal | pPa | 1000000 |
Femtopascal | fPa | 1000000000 |
Attopascal | aPa | 1e+12 |
Newton/square meter | N/m^2 | 0.000001 |
Newton/square centimeter | N/cm^2 | 10e-11 |
Newton/square millimeter | N/mm^2 | 1e-12 |
Kilonewton/square meter | KN/m^2 | 10e-10 |
barye | Ba | 0.00001 |
Dyne/square centimeter | dyn/cm^2 | 0.00001 |
Gram-force/sq. centimeter | gf/cm^2 | 1.01971621298e-8 |
Bar | bar | 1e-11 |
Millibar | mbar | 1e-8 |
Microbar | μbar | 0.00001 |
Standard atmosphere | atm | 9.86923266716e-12 |
atmosphere technical | at | 1.01971621298e-11 |
Kilogram-force/square meter | kgf/m^2 | 1.01971621298e-7 |
Kilogram Force per Square Centimeter | kgf/cm^2 | 1.01971621298e-11 |
Kilogram-force per square millimeter | kgf/mm^2 | 1.01971621298e-13 |
Centimeter water (4°C) | cmH2O | 1.01971621298e-8 |
Millimeter water (4°C) | mmH2O | 1.01971621298e-7 |
inch water (4°C) | inAq | 5.01827331454e-8 |
Foot water (4°C) | ftAq | 4.18189442878e-9 |
Pound-force per square inch (psi) | lbf/in2, psi | 1.45037743897e-10 |
Kip-force per square inch (ksi) (kilopound per square inch) | ksi, kipf/in2 | 1.45037743897e-13 |
Pound-force per square foot | lbf/ft^2 | 2.08854351212e-8 |
Poundal per square foot | pdl/ft^2 | 6.71969003693e-7 |
Torr | Torr | 7.50061682704e-9 |
Centimeter mercury (0°C) | cmHg | 7.50061682704e-10 |
Millimeter mercury (0°C) | mmHg | 7.50061682704e-9 |
inch mercury (32°F) | inHg | 2.95298984456e-10 |
Micropascal to Dyne/square centimeter conversion table
Micropascal | Dyne/square centimeter |
---|---|
1 | 0.00001 |
2 | 0.00002 |
3 | 0.00003 |
4 | 0.00004 |
5 | 0.00005 |
6 | 0.00006 |
7 | 0.00007 |
8 | 0.00008 |
9 | 0.00009 |
10 | 0.0001 |
20 | 0.0002 |
30 | 0.0003 |
40 | 0.0004 |
50 | 0.0005 |
60 | 0.0006 |
70 | 0.0007 |
80 | 0.0008 |
90 | 0.0009 |
100 | 0.001 |
Common Pressure Conversions
Other Common Converters
Popular Calculators
Frequently Asked Questions
How can I use Pressure Converter?
Select the current unit in the top column, the desired unit in the bottom column, and enter a value in the top left column to generate the resulting conversion.What are the SI Units of Pressure?
The SI unit of Pressure is pascal.What are the different units of Pressure?
The SI unit of Pressure is pascal. Alternatively, the Pressure can also be expressed in .